Utax CDC 1525 Manual do Utilizador descarregar pdf (Página 16)

1/2

Technical Bulletin

UTAX

CD 1430

TA DC 2430

TB 10 / Firmware Upgrade (V 7.00)

2K5-B070/M

Date: 04-03-2011

OPIC

The firmware was upgraded as follows.

ONTENT OF

HANGES

 Support for initialization of "Set Maintenance Mode ID" at U010.

U010 that can change PIN code of the maintenance mode was added at the previous version.

However, it could not be initialized from the normal maintenance mode. Therefore, following is changed to enable it.

Change: Adding "Initialize" button in the operation panel to enable initialization.

 Relocation of the print position of the machine serial number information on the sample pattern (U089)

The machine serial number is not printed when A3 pattern is printed to A4 paper at U089 [Outputting the MIP-PG pattern].

Therefore, the print position is relocated to the leading edge section of the paper.

 Support for charge counter back-up method at U004 [Setting the machine number].

Charge counter is now returned to the EEPROM with the serial number by executing U004 when detecting C0180 error if the EEPROM in

the main machine is out of order.

1. Install the EEPROM with MAC address written to the mainframe.

2. Store the new firmware to the USB memory.

3. Turn the power on. (Firmware update starts.)

4. C0180 occurs if turning the power off and on after finishing update.

5. C0180 is released with executing U004.

Precaution: Please surely upgrade the firmware before releasing C0180. If releasing without upgrade, the data is cleared as before.

 Measure against Kerberos authentication failure.

Kerberos authentication from MFP may fail when the expiry date for use of the user account approaches. - Therefore, this is corrected.

 Measure against F000 error with a certain data.

F000 may occur when continuously printing a certain data. - Therefore, this is corrected.

 Measure against CF248 error with a certain data.

 Measure against CF46F error with a certain data.

 Measure against print failure with umlaut font.

Umlaut font may not be correctly printed out with Ver. 6.00 that is the version at the previous time. Therefore, this is corrected.

 Changing the message of toner supply (Add toner) in French.

Changing the message of toner supply (Add toner) in French because the message may be misunderstood.

"Ajout du toner" --> (Change request) "Rechargement toner en cours.

 Support for a certain macro data.

Actual result may differ from the expected one when outputting a certain macro data. - Therefore, this is corrected.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 34 35

Sem comentários

Utax CDC 1525 Manual do Utilizador Página 16